3/4 Axle 60 Ton Low Bed Trailer for Sale Nigeria
Nigeria customers customized a 60 ton low bed trailer. This customer-first saw our product on Alibaba and left his phone number and product information of interest on the platform. After our sales contacted the customer, we sent the customer a more detailed product catalog and quotation.
The customer confirmed the size and configuration of the 3 axle 60 ton low bed trailer. The customer also ordered a 4 axle lowbed trailer to his friend. Such a piece of transportation can save freight.
4 Axle Lowbed Trailer Semi Trailer for Sale Price
If the brake drum is hot, we must first determine whether it is caused by the main car or the low bed semi trailer. The inspection, analysis, judgment, and processing can be carried out in accordance with the following steps.
1. When the lowbed semi trailer brake phenomenon occurs more frequently, you can disassemble the handshake on the yellow signal air pipe connected to the main trailer, block the wheel, release the hand brake, put the air pipe in the bucket, and check for bubbles. Appear.
During the inspection, the engine should not be turned off, and the inspection time should not be less than 20 minutes. At the same time, it is required to apply the brakes and pull and release the handbrake several times during the inspection. The purpose is to check whether the spool of the trailer valve of the main vehicle can be returned in time.
If there are bubbles in the bucket, it can be determined that it is a problem with the main vehicle. Sometimes it is not always possible to find the cause of the fault on the spot, and it is necessary for the driver to pay attention to the condition of the vehicle while driving.
4 Axle 60 Ton Lowbed Trailer with Best Manufacturer
2. When the driver already knows that the lowbed semi trailer has a holding brake, but can't find the cause of the failure, he can pay attention to the inspection during driving. If the driver feels that the trailer starts to break, he can step on the clutch. At this time, the speed of the vehicle slows down significantly, which proves that it may start to break.
The driver can slowly slide the vehicle to the side of the road, turn on the double jump lights, do not step on the brake, or pull the handbrake because stepping on the brake or pulling the handbrake will exhaust the gas in the sub-cylinder through the trailer ABS valve. Find out the reason.
The on-site inspection steps are as follows: first, turn off the engine and block the wheels to prevent the vehicle from moving. Look again to see if the push rod of the sub-cylinder has been extended. If the pushrod has been extended, it proves that the trailer has indeed braked.
Details of 60 Ton Low Bed Truck Trailer Price
At this time, disconnect the signal air pipe connecting the main vehicle and the trailer, and hear the exhaust sound at the axle, and at the same time the sub-cylinder push rod retracts, it can be determined that the main vehicle is the problem; if the exhaust sound is not heard, the sub-cylinder is at the same time The putter did not retract either, which can be determined to be a trailer problem.
If it is confirmed that it is the cause of the main vehicle, and the low bed semi trailer has a brake phenomenon, please contact the main vehicle service station to solve the problem. If it is the low bed semi trailer itself that causes the brakes to appear on the axle, it is usually the trailer relay valve (sometimes the ABS valve) that has a problem, and it can be solved by replacing the relay valve.
Drawing of Lowbed Semi Trailer for Sale
